KD7019 - Advanced Embedded System and Technologies - Northumbria University

Learning Outcome 1: Critically analyse design specification requirements, for an embedded microcontroller application and choose appropriate microcontrollers and appropriate development tools in order to implement a specification.
Develop suitable hardware for interfacing to microcontroller based systems and the co-requisite application software to satisfy system specifications

Learning Outcome 2: Intellectual / Professional skills &abilities ((UKSPEC SM2m, D1m, D7m, EP4m, EP10m, SM2fl, D1fl, EP1fl, EP3fl)
Ability to design embedded software, interfacing hardware and select appropriate development tools to achieve a particular specification.
Demonstrate a knowledge and awareness of the need to develop microelectronic systems, not only to satisfying specifications, but also the commercial and legal requirements of potential products.

Learning Outcome 3: Personal Values Attributes (UKSPEC ET1m, ET3m, ET5m, ET6m, EP7m, ET1fl, ET3fl, ET4fl, ET6fl)
Ability to use CAD to design embedded systems satisfying both engineering and legal obligations.

An individual, word processed project report based on the embedded system project specified in this assessment specification needs to be completed.

In the courseworkyou should

Question 1. Draw a diagram showing the interface hardware circuits necessary between the microcontroller KL25Z and peripheral devices (the switch board, the LED board, the inertial sensor, and the touch pad). Textual explanation about the diagram is needed with the I/O pin assignment.

Question 2. Develop the State Diagram and Flow Chart for the design according to the specification.

Question 3. Develop the C program by following the state diagram and flow chart to meet the specification.

Attachment:- Advanced Embedded System and Technologies.rar